DINESH RATHI GROUP OF COMPANIES

ELCON SUPPORT SYSTEM
Strong, Fast, Economical and Adjustable

Insert the spring nut anywhere along the continuous slotted channel. The rounded nut ends permit easy insertion.
A 90* Clockwise turn aligns the grooves in the nut with the inturn edges of the channel. Fitting can be placed anywhere along the channel opening, permitting complete freedom of adjustment. The need for drilling holes is eliminated.
Insert the bolt through the fitting and into the spring nut. See illustration 5 for end view showing the nut in place)
Additional channel sections can now be bolted to the fitting already in place by following procedure described in steps1-3
Tightening with a wrench locks the serrated teeth of the nut into the iturned edges of the channel, to complete a strong, vise-like connection.
ELCON SUPPORT SYSTEM is designed with many time saving features. Fully adjustable & reusable, with a complete line of channels, fittings & accessories for Multipurpose applications.
NO WELDING NO DRILLING
Are the basic fundamentals of installing this system.
Applications : -
ELCON Support System can be used for :
ELECTRICAL & INSTRUMENTATION APPLICATIONS
a) Flexible Cable Tray Support Systems,
b) Lighting Fixture Supports,
c) Instrument Mounting Plates,
d) Conduit Supports etc…
MECHANICAL APPLICATIONS
a) Piping Rack,
b) Concrete Inserts,
c) Beam Attachments
d) A/c Duct Supports etc…
Channel Code
Height 
Width  
Thickness
A - A  82
82.5
41.3
2.5
A - A  61
61.9
41.3
2.5
A - A  41 
41.3
41.3
2.5
A - B  41
41.3
41.3
2.0
A - C  41
41.3
41.3
1.5
A - A  21
21.3
41.3
2.5
A - B  21
21.3
41.3
2.0

Standards Applicable
Materials :
Hot Rolled Steel as per IS 1079, ASTM A621, BS 1449HR2, JIS G 3131SPHD.
Cold Rolled Steel as per IS 513, ASTM A336, BS 1449CR, JIS G3141.
Structural Steel (for fittings & brackets) IS 2062, ASTM A570, BS 4360, JIS G 3101.
Hot Dip Galvanized : As per IS 2629, ASTMA123, BS 729, JIS H 8641.
Standards Applicable
Standards Applicable Continuous Slot Concrete Insert are designed to provide a pre-set support system cast in concrete ceilings, walls & floor to allow flexibility of attachments at any point along the channels. This provides an excellent support for pipe, conduit, cable trays etc… Continuous Concrete Insert are manufactured from Am-Strut’s Standard Channels. Anchor Spacing is 200 mm C/C. We also provide special PVC end caps, to avoid concrete insertion into the channels at the time of concreting.
Standards Applicable
ELCON offers a comprehensive range of fittings & accessories to complete the total support system. Generally, fittings are manufactured from 6mm MildSteel, however, can be offered in different dimensions as well asthickness depending on applications. Normal finish of all brackets and fittings is HOT DIP GALVANIZED. All Holes for all the fittings are a standard size of 14 mm made of M12 Hex Bolts.
ENQUIRY FORM

LOCATE US
ELCON CABLE TRAYS PVT. LTD.
FORMALLY ELCON INSTRUMENTS & ENGINEERS

Corporate office:-“DYNASTY” 3RD Floor, Near Hotel Nebula, Opp Om Hospital, Pashan Road, Bavdhan, Pune -411021.
Mfg Unit Address:-Gat No-21, H No-253, vadgaon budruk,Tal-Bhor,Dist-Pune-412210.
Tel : 020-69000925/926
Mobile : + 91 9822066977
Email :elconhouse@gmail.com ,
dinesh@elconhouse.com.

@copyright ElconCableTraysPvtLtd.AllRightReserved